Drop Pads for Kegs

Draymans Drop Pads & Mats for Kegs, Casks & Barrels, used by breweries, pubs and clubs when barrels need to be dropped from either wagons or into cellars. This small drop pad measures 600 mm x 600 mm x 300 mm and is cut from 32 density foam, ensuring that its dense enough to absorb the impact from 11 gallons kegs from over 2400 mm or 8 feet. Finished in the heaviest duty tarpaulin we can find, which is 900 gsm. The Tarpaulin cover is double stitched and set with brass eyelets to allow the air from the impact to escape, no 'over' explosions here! Tied the old fashioned way with a 6 mm polypropylene twine, for a hardcore drop pad, you're in the right place.

Cellar Pad for Kegs, Casks & Barrels. Used by breweries, pubs and clubs when barrels need to be dropped into cellars. This small pads measures 900 mm x 900 mm x 300 mm and is cut from 32 density foam, ensuring that its dense enough to absorb the impact from from 11 gallon kegs from over 2400mm or 8 feet. Finished with the heaviest duty tarpaulin we can find at 900 gsm, which is double stitched, and set with brass eyelets to allow the air from the impact to escape. Then tied the old fashioned way, with a 6 mm polypropylene twin rope.

Cellar Pad for Kegs, Casks & Barrels, used by breweries, pubs and clubs when barrels need to be dropped into cellars. This small pads measures 1000 mm x 1000 mm x 300 mm and is cut from 32 density foam, ensuring that its dense enough to absorb the impact from from 11 gallons kegs from over 2400mm or 8 feet. Finished with the heaviest duty tarpaulin we can find at 900 gsm, which is double stitched, and set with brass eyelets to allow the air from the impact to escape. Then tied the old fashioned way, with a 6 mm polypropylene twin rope.

Barrel Hooks and Ropes. A 10 meter polypropylene three strand rope, with a 23mm diameter and a 5 ton BS and manually spliced hand draw soft loop. Attached is a 160mm x 8 mm sprung loaded carbine hood, tested to 10 tons with a zinc plate finish. This product enables lowering barrels and collecting used barrels in or out of cellars quickly, safely and smoothly.

The Keg Skate Dolly from Handle-iT is designed for use with both 9 gallon and 11 gallon kegs. Thanks to its design, both keg sizes can be held securely in place with no need for adjustment or straps. The external spigots line up with the outside of a standard 11 gallon keg, while the inside spigots fits just inside the rim of a standard 9 gallon keg. 

The Keg skate is constructed of heavy duty steel and then powder coated, giving it a durable and high quality finish. Unlike common other keg skates, the wheels are positioned underneath the keg, reducing the size of the dolly, creating less of a trip hazard around the tight confines of cellars and bars, and creating a slightly higher platform reducing stooping while swapping taps. 

The Keg Dolly is available with a range of wheel options, with standard black crumb rubber as standard, and also white nylon or grey non-marking wheels.