Powered Full Security Storage Trolley

Powered Full Security Storage Trolley with a fully plastic clad storage chassis, no onlookers can see the contents of your trolley, acting as a deterrent to any attempt of theft. The standard heavy duty padlock latch can be upgraded to a key lock system, or better yet a keypad or electronic key card keyless entry systems. The High Impact Resistant 6mm Polypropylene which impacts even from large lump hammers, wont smash or crack, with the hammer bouncing of the plastic, its more dangerous for the thief than the contents. The plastic clad base can be easily cleaned, even with heavy duty cleaners, without deterioration.

User Interface has an ergonomically positioned handle and robust user interface, the buttery fly throttle is perfectly positioned to provide 400w of high torque power directly through the transaxle. Intelligent battery indicators give clear LED light instruction to tell you the exact state of your battery charge, with a 20km range between charges this lets you know exactly when you need to return to base for a charge or battery swap. The variable speed adjustment allows you to set the trolley speed directly on the operator controls, allowing the operator to restrict the speed in certain areas. For instance, where there is a high volume of pedestrians to increase safety, and for further control, this parameter can be controlled and set at factory so the speed can be set anywhere between 1 min - 6 max kmph. The heavy-duty industrial steel casing for the user interface is IP54 Rated and then covered with a further moulded Perspex cover. Finally, the anti-trap button perfectly positions so that if it were to hit the operator the trolley would automatically brake and go into safety mode so that it couldn’t be moved without reset, stopping any operator getting trapped.

Fitted with easy clean 6mm polypropylene on the trucks body, and with the base unit laser cut from a single piece of box section for additional strength and a curvaceous corner that is kinder to any ankles or walls that they may encounter compared to a mitred frame, and considerably stronger that a pressed sheet steel base. Under side, the battery is fully encased in a 2mm thick steel box, eliminating the risk of damage to any lead acid battery or even worse risking thermal runaway from a pierced lithium battery. The whole unit is controlled by our Curtis Microprocessors which is where the clever bit happens, controlling all the parameters within the trolley; acceleration, max speed, regenerative braking characteristics, amber warning beacons, even the audible warnings. Thyristor speed control system ensures the user is in total control. The more pressure you apply, the faster the trolley will move, reduce the pressure and the speed will reduce accordingly. There is no steeping through power steeps that you would get through a transistor control, smooth all the way.

Powered Platform Truck with Removable Sides Training is now available either on-site powered trolley operation training for anywhere in the UK, or at our training centre here in Devon,  training for groups of up to 6 people starts at £360 per day. To arrange training, As the HI-POW range is designed and manufactured here in the UK, if you want something a little different, just call the team and we can get the design together for you.

For more information, take the link to our Powered Trolleys info page, or contact the team on (0044) +1803 875 222 or at sales@handle-it.com