-
EURO and GKN Heavy Duty Pallet Trucks, a staple for any warehouse or logistic operation, whether you have just started your commercial journey, or whether you have a fleet of vehicles already in place and you are just kitting them out. Deciding on the...
Capacity: 2500kg Wheel Diameter: 200mm Wheel Type: Polyurethane / Nylon Fork Length: 800mm / 1000mm / 1150mm Fork Width: 540mm / 680mm From £418.80 (Inc. VAT)From £349.00 (Ex. VAT) -
Very heavy duty pallet truck a superb tool for moving heavier loads on pallets or size-standardised containers. Thanks to its heavy-duty capacity, this pallet truck makes moving high tonnage pallet loads a piece of cake.FOR USE WITH GKN & EURO...
Capacity: 3500kg Wheel Diameter: 200mm Wheel Type: Polyurethane / Tandem Polyurethane Fork Length: 2500mm Fork Width: 540mm From £562.80 (Inc. VAT)From £469.00 (Ex. VAT) -
Low profile pallet trucks are an excellent tool for lifting and carrying loads on pallets or size-standardised containers. Thanks to its entry and exit roller and ergonomic handle design, this product is easy to use and manoeuvre. A must for any...
Capacity: 1500kg Fork Length: 1000mm / 1150mm Fork Width: 540mm / 680mm Lowered Height: 51mm Lifted Height: 170mm From £658.80 (Inc. VAT)From £549.00 (Ex. VAT) -
Short Pallet Truck, for handling particularly small pallets, or for Euro pallet across the 1200mm face. Particularly useful in lorries trailer units, so as not to damage curtains or on tail-lifts. A bit of time saved off every drop, they will soon pay...
Capacity: 2500kg Wheel Diameter: 200mm Wheel Type: Poly/Nylon Fork Length: 800mm Fork Width: 520mm £694.80 (Inc. VAT)£579.00 (Ex. VAT) -
Short & Narrow Pallet Truck, often referred to as printers pallet trucks or tile pallet trucks, are for handling particularly small pallets. Any pallet smaller than 700mm on the entry face, the standard 525mm fork won't carry. This would normally...
Capacity: 2500kg Wheel Diameter: 200mm Wheel Type: Poly / Nylon Fork Length: 800mm Fork Width: 460mm £694.80 (Inc. VAT)£579.00 (Ex. VAT) -
Extra Long Pallet Truck, an excellent tool for lifting and carrying loads on pallets or size-standardised containers. Thanks to its entry and exit roller and ergonomic handle design, this product is easy to use and manoeuvre. Minimise risks when...
Wheel Type: Nylon / Single Nylon Wheel Diameter: 200mm Capacity: 2000kg / 2500kg / 3500kg Fork Length: 1500mm / 1800mm / 2000mm Fork Width: 540mm / 680mm From £714.00 (Inc. VAT)From £595.00 (Ex. VAT) -
Galvanised Pallet Truck an essential for any operation where salty, brine conditions are prevalent, or factories where paint is not acceptable for contamination reasons. Whether you have just started your commercial journey, or whether you are fed up...
Capacity: 2500kg Wheel Type: Nylon / Tandem Nylon Wheel Diameter: 200mm Fork Length: 1000mm Fork Width: 540mm / 680mm From £834.00 (Inc. VAT)From £695.00 (Ex. VAT) -
Extra low profile pallet truck, a suitable and practical solution for meeting all of your manual handling needs. Minimise risks when moving heavy loads. As a part of the MA Range, there are multiple versions of this Pallet Truck. This version has a...
Capacity: 1000kg Fork Length: 1120mm Fork Width: 530mm/680mm/838mm Lowered Height: 35mm Lift Height: 96mm £1,006.80 (Inc. VAT)£839.00 (Ex. VAT) -
Standard Weighing Pallet Trucks are an excellent tool for lifting and carrying loads on pallets or size-standardised containers. Thanks to its entry and exit roller and ergonomic handle design this product is easy to use and manoeuvre. This version comes...
Capacity: 2200kg Wheel Type: Rubber/Tandem Polyurethane Wheel Size: 180mm/200mm Fork Length: 1150mm Fork Width: 560mm/690mm From £1,350.00 (Inc. VAT)From £1,125.00 (Ex. VAT) -
GKN and EURO pallet truck built from stainless steel and designed as a cost effective solution to full stainless steel requirements, with the main chassis, push rods and handle are from stainless 304, please check with eth sales team on you specific...
Capacity: 2000kg Wheel Diameter: 200mm Wheel Type: Nylon/Tandem Nylon Fork Length: 1000mm/1150mm Fork Width: 540mm/680mm £2,728.80 (Inc. VAT)£2,274.00 (Ex. VAT) -
GKN and EURO pallet truck built from stainless steel and designed from the ground up for damp, humid and clean environments. Suitable for all applications where high hygienic standards are enforced, in environments such as chemical,...
Capacity: 2000kg Wheel Diameter: 200mm Wheel Type: Nylon / Tandem Nylon Fork Length: 1000mm / 1150mm Fork Width: 540mm / 680mm From £3,592.80 (Inc. VAT)From £2,994.00 (Ex. VAT) -
This Sack Truck Ratchet Strap is a more than a “recommended purchase”. With your sack truck, it’s a must. Simply, quickly and safely strap the load firmly so it’s attached the sack truck, it will not only increase the safety, but...
Overall Length: 3000mm Lashing Capacity: 400kg Ultimate Capacity: 800kg £20.40 (Inc. VAT)£17.00 (Ex. VAT) -
This Trolley Ratchet Strap is a recommended addition to every trolley, securing the load is vital to ensure the load can be moved at speed to get efficiency up, however, more importantly for safety. At Handle-iT we firmly believe safety is not...
Lashing Capacity: 400kg Ultimate Capacity: 800kg Length: 5000mm £22.80 (Inc. VAT)£19.00 (Ex. VAT) -
This self retracting ratchet strap has a built in self-tensioning system that removes slack with the press of a button saving you time and increasing efficiency. Self retracting ratchet straps are excellent tools that help save time and reduce operator...
Ultimate Capacity: 500kg Length: 5000mm £34.80 (Inc. VAT)£29.00 (Ex. VAT) -
This scanner holder is designed with a universal mount, making it easy to attach to the vast majority of trolleys and sack trucks. An articulated joint allows you to rotate and reposition the scanner grip to your liking, providing an ergonomic and...
Capacity: N/A Finish: Safety Yellow (RAL 1003) £154.80 (Inc. VAT)£129.00 (Ex. VAT)
Pallet Movers
Pallet Stackers, Powered Pallet Trucks, and Pump Trucks, everything you need is here. With over 30 years' experience in the industry, there isn't a great deal we can't help you with. Catering for both specialist applications or standard run of the mill movement or expertise is invaluable.
Fed up with braking boards off pallets just because fork sizes are wrong? This is simple to solve, and it increases safety, productivity and reduces the costs of pallets and the pain in disposing of them.
Need more space as you grow? But the costs of warehouse move, new premises and racking scaring you? These things are also very simple to solve and by solving them reduces costs, there is usually very little outlay, in fact sometimes none.
Our vast experience focuses on maximising the amount of product we store in your warehouse and minimal costs, reducing wasted space, illuminating hiding places which tend to turn into dumping grounds, maximising hot product positioning, minimising movements of both product and people and maximising flow rates. This all sounds so technical, but 9 times from 10 is just common sense.